Electrical Specifications - Cello Encore Amplifier Owner's Manual

Electrical Specifications

ENCORE AMPLIFIER
Power Output
Single Amp
I MP (Ohms)
8
4
Bridged Set
I MP (Ohms)
8
I MD SMPTE
60Hz & 7kHz
20V ouput ................................................................. 3%
THD
20Hz - 20kHz
8 Ohms 20V output ............................................... <0.3%
4 Ohms 20V output <0.3%
Frequency Response
20kHz .................................................................. -0 .3d B
100kHz.................................................................-6.0dB
Channel Separation
L-R ..................................................................... Infinite
Signal to noise
20V output
1kHz ................................................................. <-100dB
Input Impedance
Non-inverting ............................................... 330kOhms
Inverting ........................................................... 5kOhms
Input Sensitivity
20V output, 8 Ohms
50W (RMS) .......................................................... 1.485V
Gain ...................................................... 28.5dB unbalanced
NOTE: All measurements are for one mono amp unless otherwise indicated.
(All specifications subject to change without notice.)
ENCORE TRUE DUAL MONO AMPLIFIER
Rated
Watts (RMS)
50
100
Watts (RMS)
200
34.5dB balanced
7