Download Print this page

Cello Encore 150 Owner's Manual

Power amplifier

Advertisement

Quick Links

ENCORE 150
POWER AMPLIFIER
OWNER'S MANUAL

Advertisement

loading

Summary of Contents for Cello Encore 150

  • Page 1 ENCORE 150 POWER AMPLIFIER OWNER'S MANUAL...
  • Page 3: General Product Safety

    GENERAL PRODUCT SAFETY For your safety and the proper operation of this product, please read both this document and the owner's manual before continuing to unpack or install this product. 1) This product is designed for indoor commercial or residential use. Never use this product outdoors, in high humidity or in the presence of combustible materials.
  • Page 4 AC Power Cord Precautions: Power cords should only be handled by their plugs. Do not handle power cords if hands or cords are wet. Do not place cords under rugs or where they may be stepped upon. Do not pinch cords in door jams, cabinet doors or under furniture.
  • Page 5 Encore 150 to provide you with complete satisfaction. Please read this manual carefully and care for your Encore 150 Amplifier so that it will retain its value, beauty and performance. If you have any questions, contact your authorized Cello Designer or call the factory.
  • Page 6 INSTRUCTIONS Unpacking The Encore 150 consists of 2 units each packed in a separate carton. Check to be sure you have both cartons. The packing boxes for the Encore 150 Amplifier should arrive in good condition. Please inspect for damage to the carton, although this is most unlikely due to the strength of the carton construction.
  • Page 7 6) Install AC cable into IEC mains connector on rear of each power amplifier. 7) Connect AC cables to AC mains. The Encore 150 Amplifier can be used as part of a complete Cello System, or in conjunction with other speakers, electronics and cables.
  • Page 8 Bridging The Encore 150 has a balanced output configuration. It is not bridgable. Caution: DO NOT tie outputs to ground. Bridging the Encore 150 will cause damage and void warranties.
  • Page 9: Cello Limited Warranty

    Cello will not pay freight if units are returned without a Return Authorization number (RA#). Cello will not pay freight if units are found to be in perfect working order. Warranty of Repair Work Performed: Any specific repairs or modifications effected by the factory or authorized service...
  • Page 10 Returns without R/A numbers will not be accepted. Returns received in original Cello packaging will be returned in original packing. Returns received in non-Cello packing will be returned in new Cello packaging at the owner's expense. If you need replacement packing materials, please contact the Customer Service Department at the factory.
  • Page 11: Electrical Specifications

    ELECTRICAL SPECIFICATIONS Encore 150 Amplifier Power Output Rated Watts (AVG.) Ohms ......150W 4 Ohms ......300W IMD SMPTE 60Hz & 7kHz 8 Ohms 150W output ....< 0.05% 20Hz-20kHz Ohms 150W output..... < 0.1% 4 Ohms 300W output ..... <...
  • Page 12 Cello, Ltd. 315 Peck St., Bldg. 23, New Haven, CT 06513 USA Tel. 203 867-4008 Fax 203 867-4014 Cello, Ltd. is a subsidiary of Cello Music & Films Systems, Inc. 91-0030-00 (4/98)