Chapter/Track/Title Repeat Playback; Switching The Audio Tracks; Switching The Angle (Dvd Only); Switching The Subtitles (Subtitle Language) (Dvd Only) - Alpine PKG-2000P Owner's Manual

Chapter/Track/Title Repeat Playback

Use this function to play the disc's titles, chapters or tracks repeatedly.
During playback, press REPEAT.
The repeat mode switches each time the button is pressed.
DVD
The chapter is played repeatedly.
REPEAT CHAPTER
The title is played repeatedly.
REPEAT TITLE
The mode returns to normal
REPEAT OFF
playback. (Factory default)
VIDEO CD
The track is played repeatedly.
REPEAT TRACK
The entire disc is played repeatedly.
REPEAT DISC
(Factory default)
• The track/disc repeat modes cannot be used on video CDs with
playback control (PBC). Set VCD PLAY MODE to turn the PBC
function off. Refer to "Setting the video CD Play Mode" (page 23).
• For some discs it is not possible to switch the repeat mode.

Switching the Audio Tracks

DVDs can have up to 8 different audio tracks. These alternate tracks
can be switched during playback.
During playback, press AUDIO.
The sound switches between the alternate audio tracks recorded
on the disc each time the button is pressed.
• The selected alternate track becomes the default setting every time
the power is turned on or the disc is replaced. If the disc does not
include that track, the disc's default language is selected instead.
• Not all discs will allow changing the alternate audio tracks during
playback. In these cases, select audio tracks from the DVDs menu.
• There may be a delay before the selected alternate track begins to
play.
Video CDs with multiplex audio
During playback, press AUDIO.
The left and right channels will be output as shown in the fi gure
below, each time the button is pressed.
LR LL RR LR
14
-EN

Switching the Angle (DVD only)

On DVDs in which scenes have been fi lmed from multiple angles, the
angle can be switched during playback.
During playback, press ANGLE.
The angle switches between the angles recorded on the disc,
each time the button is pressed.
• Some time may be required for the angle to change.
• Depending on the disc, the angle may switch in one of two ways.
- Seamless: The angle switches smoothly.
- Non-seamless: When the angle is switched, a still picture is
displayed fi rst, after which the angle switches.
Switching the Subtitles (subtitle language)
(DVD only)
With multiple subtitle language DVDs, the subtitle language can be
switched during playback, or subtitles can be hidden.
During playback, press SUBTITLE.
The subtitle switches between the languages recorded on the
disc and OFF each time the button is pressed.
• There may be a delay before the selected subtitle appears.
• No all discs will allow changing the subtitles during playback. In
these cases, select subtitles from the DVD's menu.
• The selected subtitle language becomes the default setting every
time the power is turned on or the disc is replaced. If the disc does
not include that language, the disc's default language is selected
instead.
• For some discs, the subtitles will be displayed even when this is set
to off.
Tips
Switching from the disc menu.
For some discs, the audio language, angle and subtitles can
be switched from the disc menu.
1 Press , select the item, then press
MENU
2 Press , , or to select the language or angle,
the press .
ENTER
(For some discs, they can be selected using the
"0" to "9" while the language or the
number keys
angle menu is displayed.)
.
ENT