Alpine NVE-N055PV Owner's Manual page 11

Transmitting indicator
Blinks while the remote control
signals are transmitted.
Joystick
Selects items from menus
and moves the map in eight
directions.
ENTER button
Selects a highlighted item in
the menu when the button is
pressed.
Press this button until a click
sound is produced to
execute your selection.
RETURN button
Returns the navigation
system to the previous
searching.
LIGHT button
When this button is pressed, the
MENU, RETURN, VOICE and
buttons light up for 5 seconds.
button
Press to switch between the map
and guide (with arrow) modes.
ZOOM buttons (5 5 5 5 5 , 6 6 6 6 6 )
Change the map
magnification ratio
upward or downward.
POS. (Position) button
Returns to the current
position of your vehicle or
displays the latitude/
longitude.
When this button is kept
pressed, the screen display
changes as follows:
North-up Heading-up
LO.PT. (Local Point) button
Pressing this button displays the
current position of the vehicle or
local interest points in the vicinity.
When this button is pressed, the
selection menu for the displayed
local points will appear in the
display.
ALPINE Navigation System NVE-N055PV (E) 68P21523Y16-O
POS.
3D-View
GPS mark
• Red ...... calculating position
• Blue ..... two-dimensional
position calculation
• Green .. three-dimensional
position calculation
• None .... position not being
calculated/cannot be
calculated
(Narrow range display)
(Wide range display)
If you press the
POS. button
while you are
travelling on an
arterial road, the
Tips
latitude/longitude
and the name of
that arterial road
are displayed.
11