Alpine iDA-X301RR Owner's Manual page 42

<JAPANESE CAR>
This unit
iPod Connection (sold separately)
USB connection (iDA-X303 only)
Connect USB cable to an iPhone (iDA-X303 only)/iPod with
Interface cable for iPod.
Interface cable for iPod (supplied, iDA-X303 only)
Direct connection
Connect iPod direct connector to an iPod with FULL SPEED™
connection cable (KCE-433iV).
FULL SPEED™
Connection Cable
(KCE-433iV) (supplied,
iDA-X301/iDA-X301RR only)
40
-EN
Front Frame
Screws (M5 × 8)
(Included)
Mounting Bracket
USB cable
Remove the iPod
Remove the iPod from FULL SPEED™ Connection Cable (or
Interface cable for iPod (iDA-X303 only)).
• Remove the iPhone/iPod after the unit has been changed to a source
other than the iPhone/iPod. If the iPhone/iPod is removed while
playing, data may be lost.
• If sound is not output or the iPhone/iPod is not recognized even when
the iPod is connected, remove the iPhone/iPod once, then connect it
again, or reset the iPod.
• Do not leave the iPhone/iPod in a vehicle for a long time. Heat and
humidity may damage the iPhone/iPod and you may not be able to
play it again.
USB memory Connection (sold separately)
Connect USB memory
1. Connect the USB cable to the USB connector of the unit, and
then secure the connection using the lock case supplied with
USB cable as shown below.
This unit
2. Connect USB memory to USB cable.
This unit
USB connector
Remove USB memory
Pull out USB memory squarely from the USB cable.
This unit
USB connector
• When removing USB memory, pull it out straight.
• If sound is not output or USB memory is not recognized even when
USB memory is connected, remove USB memory once, then connect
it again.
• Change to a source other than the USB memory mode, then remove
the USB memory. If the USB memory is removed in the USB memory
mode, data may be damaged.
• Route the USB cable away from other cables.
Portable Audio Player Connection (sold separately,
iDA-X303 only)
Connecting a Portable audio player
Connect the cable supplied with a Portable audio player to
the USB cable.
Disconnect the Portable audio player.
Disconnect the cable supplied with the Portable audio
player from the USB cable.
• Refer also to the Owner's Manual of the Portable audio player.
USB memory
(sold separately)
lock case
USB memory
(sold separately)
Cable (supplied)
USB memory
(sold separately)
Cable (supplied)