Adjusting the High Pass Filter
The High Pass Filter on this unit can be adjusted to suit your personal
taste.
For iDA-X303, the following setting can be made only when the
IMPRINT audio processor (PXA-H100) is not connected.
1
Press and hold IMPRINT (iDA-X303 only) or
SOUND (iDA-X301/iDA-X301RR only) for at least 2
seconds to activate the AUDIO selection mode.
2
Turn the Double Action encoder (iDA-X303 only)
or Rotary encoder (iDA-X301/iDA-X301RR only) to
select the HPF Adjustment mode, and then press
/ENTER.
SUBW
SUB SYSTEM*
SUBW
* Displayed only when subwoofer is ON.
3
Turn the Double Action encoder (iDA-X303 only)
or Rotary encoder (iDA-X301/iDA-X301RR only) to
select the desired HPF frequency, and then press
/ENTER.
OFF
80 (Hz)
120 (Hz)
4
Press
to return to normal mode.
• If no operation is performed for 15 seconds, the unit will return to
normal mode automatically.
• If
is pressed during setting, the unit returns to the previous item.
• The function is inoperable when DEFEAT is set to ON.
Operating the External Audio Processor
You can call up the preset memory of the external audio processor from
this unit.
1
Press and hold PRESET for at least 2 seconds to
call the external audio processor mode when the
external audio processor is connected.
The AP Preset screen is displayed.
2
Turn the Double Action encoder (iDA-X303 only)
or Rotary encoder (iDA-X301/iDA-X301RR only) to
select the preset number, and press
• For the operation of external audio processor, refer to the Owner's
Manual of the external audio processor you purchased.
22
-EN
BASS
TREBLE
HPF
160 (Hz)
/ENTER.
SETUP
Use the SETUP menu to flexibly customize the unit to suit your own
preferences and usage. Choose settings from GENERAL, DISPLAY,
etc., to make the desired changes.
iDA-X303
SOURCE
Double Action encoder FUNCTION/SETUP
BAND/TA
/ENTER
iDA-X301/iDA-X301RR
Rotary encoder FUNCTION/SETUP
SOURCE
BAND/TA
/ENTER
Follow steps 1 to 5 to choose an item to change. See
the item descriptions following step 5 for further
details.
1
Press and hold FUNCTION/SETUP for at least 2
seconds to activate the SETUP selection mode.
2
Turn the Double Action encoder (iDA-X303 only)
or Rotary encoder (iDA-X301/iDA-X301RR only) to
select the desired item, and then press
1
2
BT
*
AUDIO
*
GENERAL
TUNER
BT
(e.g. Select GENERAL)
1
*
Displayed only when INT MUTE is set to OFF, and the mode is set to
other than BT AUDIO.
2
*
Displayed only when an external audio processor is connected. For
details, refer to the Owner's Manual of the external audio processor.
/ENTER.
DISPLAY
IPOD