Date/Time Menu; Security Menu - Lenovo ThinkPad Edge E430 User Manual

Table 4. Config menu items (continued)
Menu item
Serial ATA (SATA)
CPU

Date/Time menu

If you need to set the current date and time of your computer, select Date/Time from the ThinkPad Setup
program main menu. The following submenu is displayed:
• System Date
• System Time
To change the date and time, do the following:
1. Using the up and down arrow keys, select the item to change the date or time.
2. Press Tab, Shift+Tab, or Enter to select a field.
3. Type the date or time.
Notes: Another way to adjust the date and time is pressing the following keys:
• Fn+F5 or –: Change to a lower value.
• Fn+F6 or the combination of Shift and +: Change to a higher value.
4. Press Fn+F10 to save the changes and restart the system.

Security menu

If you need to set the security features of your computer, select Security from the ThinkPad Setup program
main menu.
The following table shows the contents of the Security menu.
Notes:
• Some items are displayed on the menu only if the computer supports the corresponding features.
• Default values are in boldface.
Submenu item
SATA Controller Mode
Option
Core Multi-Processing
Intel Hyper-Threading
Technology
Selection
• Compatibility
• AHCI
• Disabled
• Enabled
• Disabled
• Enabled
Chapter 7
Comments
Selects SATA controller
operation mode. If you
select Compatibility mode,
SATA controller operates in
compatibility mode.
Enable or disable additional
execution core units within
a CPU.
Note: If you are using a
computer with a single-core
processor, this item is not
available.
Enable or disable additional
logical processors within a
processor core.
Note: This sub-menu is not
supported in models with
an AMD CPU.
.
Advanced configuration
107