Known issues and limitations
User Interface: Remote Access issues
Only one device with remote access enabled is supported on any single LAN
All networks connected to device must support remote access
Remote access is not supported without a router
USB issues
Cannot recognize unpartitioned or unformatted external storage drives
Copy failure on large files (400 MB or larger) to a FAT-32-formatted USB device
24
Iomega StorCenter Network Storage Release Notes version 3.2.3
Description: Remote access is available on only one device on a single LAN at one
time, because only port 443 can be forwarded on a router.
Affected Software Releases: 2.6, 2.6.13, 3.0, 3.1.10, 3.1.12, 3.1.14, 3.2.3
Affected Hardware Platforms: VM x86
Workaround: —
Description: You cannot enable remote access if the Iomega StorCenter NAS device
is connected to any network that does not support remote access.
Affected Software Releases: 2.6, 2.6.13, 3.0, 3.1.10, 3.1.12, 3.1.14, 3.2.3
Affected Hardware Platforms: All
Workaround: —
Description: You cannot enable remote access if the Iomega StorCenter NAS device
is not connected to a router.
Affected Software Releases: 2.6, 2.6.13, 3.0, 3.1.10, 3.1.12, 3.1.14, 3.2.3
Affected Hardware Platforms: All
Workaround: —
Description: The Iomega StorCenter device only supports partitioned and
formatted external storage drives.
Affected Software Releases: 2.6, 2.6.13, 3.0, 3.1.10, 3.1.12, 3.1.14, 3.2.3
Affected Hardware Platforms: All
Workaround: —
Description: If you connect a FAT-32-formatted USB device to the Iomega
StorCenter device and try to copy a file that is 400 MB or larger, the copy fails.
Affected Software Releases: 2.6, 2.6.13, 3.0, 3.1.10, 3.1.12, 3.1.14, 3.2.3
Affected Hardware Platforms: All
Workaround: —
5542
6807 7288
4642
2408
5763