Turn On Power To Your Heating And Cooling System; Set Time And Date; Review Pre-Programmed Schedule - White Rodgers P200 Installation Instructions & User Manual

3.4 Turn on power to your heating and
cooling system

3.5 Set time and date

1. Press the TIME button. The display will show the hour.
– Using the buttons adjust the hour.
2. Press the TIME button. The display will show minutes.
– Using the buttons adjust the minutes.
3. Press the TIME button. The display will show the
– Using the buttons adjust the day.
4. Press the RUN button.
Congratulations!
You have completed the basic setup of
your new thermostat. It's ready to use.
To read about additional thermostat features, continue to section 4.
day of the week.
16

3.6 Review pre-programmed schedule

The thermostat is set to control temperature according to the following
pre-programmed, energy-effi cient schedule. If this schedule meets
your needs, no further action is required.
Mon - Fri
Period Start Time
Morning 6 am
Day 8 am
Evening 5 pm
Night 10 pm
Morning 6 am
Day 8 am
Evening 5 pm
Night 10 pm
To customize this schedule, continue to the next page (section 4.1).
Sat - Sun
Temp Start Time Temp
70°F 6 am 70°F
62°F 8 am 62°F
70°F 5 pm 70°F
62°F 10 pm 62°F
78°F 6 am 78°F
85°F 8 am 85°F
78°F 5 pm 78°F
82°F 10 pm 82°F
17