Table of Contents
Advertisement
Remove the Old Thermostat
Wall plate hanging on the wires
1.
Remove the front cover of the old thermostat.
2.
With wires still attached, remove wall plate from the
wall by loosening the screws. If the old thermostat has a wall
mounting plate, remove both the thermostat and the wall
mounting plate.
3.
Identify each wire attached to the old thermostat as shown in the
diagram below. Before removing wires from old thermostat,
label each wire with the letter on the old thermostat or document
the color of wire going into each terminal in the table located on
the back cover of this manual.
4.
Disconnect the wires from the old thermostat one at a time.
Important: Do not let wires fall back into the wall.
Wall opening
Wall opening
TIP
You may want to wrap the wires
around a pencil to keep them from
falling back into the wall.
5
Advertisement
Table of Contents
