Step 3: Configure The Thermostat - Emerson EE542-1Z Installation Manual

STEP 3. Configure the Thermostat
1.
To enter the INSTALLATION MENU,
simultaneously press and hold
and for 3 seconds.
You will be greeted with the
following disclaimer. To enter the
INSTALLATION MENU, press Yes.
2.
While in the INSTALLATION MENU,
and scroll the cursor
up and down respectively, the
goes back one menu level
and the and
highlighted menu item.
3.
To exit all menus and return to the
home screen press the Exit key.
1. HVAC Equipment Setup
Installation > HVAC Equipment Setup
By specifying what type of HVAC
equipment is on the customer's premise,
the thermostat will self configure itself for
optimal performance of that equipment.
As such, it is critical that you accurately
identify the type of equipment on
premise.
NOTE: It is important to select the proper setting for this option, even
if you skip the rest of the Configuration menu.
select the
Installation Menu
Changing installation settings
can impact the performance of
your system. Are you sure you
want to enter this menu?
No
Installation Settings
HVAC Equipment Setup
Network Settings
About This Device
Advanced HVAC Options
Customer Support
Exit
Outdoor Equipment Settings
Air Conditioner
Air Conditioner
Heat Pump Air - 1 Stage
Heat Pump Air - 2 Stage
Heat Pump Geo - 1 Stage
Yes
Off
1 Stage
2 Stage
9