Power Off Mode - Brother HL-1110 User Manual

General Information

Power Off mode

Power Off mode is the lowest power consumption mode, which achieves a power consumption of less than
0.28 W. When you enable the Auto Power Off feature, the machine will automatically go into the Power Off
mode after a certain period of time. To start printing, hold
up. Then send the print data.
You can enable the Power Off mode feature manually by following these steps:
a
Make sure that the top cover is closed and the power cord is plugged in.
b
Turn on the machine and wait until the machine is in the Ready mode.
c
Hold down key for about 2 seconds.
All the LEDs turn off when you enable the Power Off mode.
NOTE
You can change the Power Off mode setting through the Remote Printer Console. For more information
on the Remote Printer Console, see Remote Printer Console (Windows
key on the control panel until all the LEDs light
®
only) on page 35.
3
3
44