Toner Setting - Brother HL-1110 User Manual

Troubleshooting and other information

Toner Setting

The printing operation varies depending on the machine setting:
 Default setting (Stop mode)
The machine will stop printing until you replace the toner cartridge with a new one when the LEDs indicate
Replace Toner.
 Continue mode
To force the machine to continue printing after the LEDs indicate Replace Toner, press
to enter Continue mode (all the LEDs blink twice, and then the Ready LED (
will continue printing until the LEDs indicate Toner Ended.
To return to the default setting (Stop mode), press
NOTE
• Make sure that the top cover is closed before you change the mode.
• When the LEDs indicate an error mode, you cannot change the mode.
• If you continue printing in the Continue mode, we cannot guarantee the print quality.
• While using Continue mode the print may appear faint.
) turns on). The machine
seven times (all the LEDs blink once).
A
A
seven times
46