Brother HL-1110 User Manual page 43

General Information
LEDs Machine Status
Sleep
The machine is in Sleep Mode (Power Save mode). While the machine is in Sleep Mode, the Ready LED
( ) is dimmed, but the machine can still receive data. Receiving a print job will automatically wake up
the machine to start printing.
3
For more information, see Sleep Time on page 43.
Deep Sleep
The machine is in Deep Sleep Mode, reducing more power consumption than Sleep mode. While the
machine is in Deep Sleep Mode, the Ready LED ( ) is dimmed, but the machine can still receive data.
Receiving a print job will automatically wake up the machine to start printing.
For more information, see Deep Sleep mode on page 43.
Ready
The machine is ready to print.
Printing
The machine is printing.
Please Wait
The machine is warming up.
The Ready LED ( ) will blink in 1 second intervals.
Cooling Down
The inside of the machine is extremely hot. The machine will pause its current print job and go into
Cooling Down mode. Wait until the machine is in Ready mode.
The Ready LED ( ) will blink in 1 second intervals.
Receiving Data
The machine is either receiving data from the computer or processing data in the memory.
The Ready LED ( ) will blink in 0.5 second intervals.
Data Remaining
There is remaining print data in the machine's memory. If the Ready LED ( ) is blinking for a long time
and nothing has printed, press to print the remaining data in the memory.
The Ready LED ( ) will blink in 0.5 second intervals.
37