Table of Contents
Advertisement
External connection
1.Assemble the stand
Before attaching/detaching the stand,make sure to turn off the TV.
-Before performing work spread cushioning over the base area to lay the LED TV on.
This will prevent it from being damaged.
Stand installation instruction
2.Stand or Wall-mounted(optional)
How to mount the LED TV
(1) Take out the bracket hole cover from groove with screw driver and place on the
bracket hole;
(2) Fasten 4 screws into four nuts on the rear cover;
(3) Fasten 2 brackets with 4 M4 screws on the wall;
(4) Carefully check for the strength before releasing the LED TV.
Deepth of 4-M4.0 screw hole: 8mm
M4
M4
M4
M4
12
100mm
Advertisement
Table of Contents
