Viking 15”W Installation Manual page 8

Note: DO NOT use self-piercing type valves.
IMPORT NT NOTE: Often an air gap is required by local codes between the ice maker drain tube and the drain
receptacle.
Drain Tube,
Route to
building drain
Back View, Drain Pump Model
Screw
Service
Access
Panel
Note: If you are connecting a gravity drain model and the drain opening has been located in the floor under the base
pan according to the pre install specifications, follow steps 3 through 5 to drain the unit through the base. If not,
proceed to step 6b.
Water Inlet
Tube (field
supplied)
Drain Hose
Drain Hose,
Route to
building drain
Back View, Gravity Drain Model
Barbed Elbow
Water Inlet
Tube (field
supplied)