Vertex Standard VXR-7000 Operating Manual page 15

TOT Mute: Enable/disable the TOT (Time-Out Timer) beep
monitoring
Double-click the left mouse button to toggle the TOT
Mute feature selects "on" or "off."
When this parameter is set to "on," the alert beep will
sound from the front panel speaker before the repeater
turns itself off.
Rpt Use: Enable/disable the Time-Out Timer while operat-
ing in the repeater mode
Double-click the left mouse button to toggle the Repeater
TOT selects "yes" or "no."
The TOT time is determined via dealer programming.
VXR-7000 FM R
EPEATER
CE27 Programming Software Instruction
Channel Data Items
CE27 Main Screen (Scrolled Right)
O M
PERATING ANUAL
TOT Beep: Enable/disable the TOT beep Transmission
Double-click the left mouse button to toggle the TOT
beep selects "yes" or "no."
When this parameter is set to "yes," the alert beep will
be sent out on the air before the repeater turns itself off,
while oprtating in the "REPEATER" mode.
RPT HT: Enable/disable the Repeater Hang-on Timer
Double-click the left mouse button to toggle the Repeater
Hang-on Timer selects "yes" or "no."
When this parameter is set to "yes," the repeater will
remain keyed for a desired seconds after a receiving
carrier is dropped.
The Hang-up time is determined via dealer program-
ming.
RPT GT: Enable/disable the Repeater Guard
Double-click the left mouse button to toggle the Repeater
Guard feature selects "yes" or "no."
When this parameter is set to "yes," the transmitter in-
hibit few second before the repeater is unkeyed.
The inhibit time is determined via dealer programming.
13