ProForm 320 Cx Bike Manual page 20

HOW TO USE THE SOUND SYSTEM
To play music or audio books through the console
sound system while you exercise, plug your audio
cable into the jack on the console and into a jack on
your MP3 player or CD player; make sure that your
audio cable is fully plugged in.
Next, press the play button on
your MP3 player or CD player.
Adjust the volume level using the
volume increase and decrease
buttons on the console or the volume control on your
MP3 player or CD player.
HOW TO CHANGE CONSOLE SETTINGS
The console features a user mode that allows you to
select a backlight option for the console and to view
console usage information.
To select the user mode, press and hold down the
Priority Display button for a few seconds until the user
mode information appears in the display.
The console has three
backlight options. The
ON option keeps the
backlight on while the
console is on. The
AUTO option keeps the
backlight on only while
you are pedaling. The
OFF option turns off the
backlight.
The upper display will show the currently selected
backlight option. Press the Resistance increase button
repeatedly to select the desired backlight option.
The console can show pedaling speed and distance in
either miles or kilometers.
The lower right display will show the selected unit of
measurement. An E for English miles or an M for met-
ric kilometers will appear in the lower right display. To
change the unit of measurement, press the Resistance
decrease button repeatedly.
The lower left display will show the total number of
hours that the console has been used since the exer-
cise bike was purchased.
Press the Priority Display button to save the console
settings and exit the user mode.
20