Table of Contents
Advertisement
A simple and efficient interface allows you to use the
most high-powered functionality in the industry.
From the Software's Home Screen, observe the programs
main toolbar on the left side of the screen. The Company,
Instruments, Loops, Equipment, Test Instruments,
Calibrations, Documents, Upload/Download, and Logged
Data buttons are visible.
Company- This button opens the Company screen. From
here, you can modify the record for the Company. The
company's general information, addresses, system
options, and default reports are stored in this screen.
Note
See Chapter 9 of the User Manual for more
information about the Company screen.
Instruments- This button opens the Instruments screen.
Enter, update, and manage instrument records with this
screen. You can enter general information describing the
instrument (Manufacturer, Model Number, Serial Number,
Status, etc.) as well as set the instrument's default
calibration frequency,
This screen is also where you can define the instrument's
unique calibration points and additional information
(location, warranty information, responsible technician
and vendors, etc.)
Note
See Chapter 15 of the User Manual for more
information about the Instruments screen.
Shop for Fluke products online at:
Loops- This button opens the Master Loop Record
screen. Loops are used to manage a set of instruments
that function together in a set process. Loops are used to
manage the calibration of related instruments as one
group, using one frequency. This allows for easier
management of multiple instruments by performing a
single calibration to satisfy the requirements of all
instruments associated with the Loop.
The Loops screen functions similarly to the Instruments
screen, and contains most of the same features and
fields.
See Chapter 16 of the User Manual for more
information about the Loops screen.
Equipment- This button opens the Equipment Record
screen. Equipment items are those that the user desires
to include in the Software's database, but are not
calibrated items (example: a control panel). Equipment
records may contain Instrument and Loop records
associated with the Equipment item (example:
components composing the control panel).
The Equipment screen contains information similar to that
found in the Instruments and Loops screens, but does not
contain a Frequency or the Calibration Points tab. In
addition, the Instruments/Loops tab is found, where users
may view the Equipment Record's associated items.
MyFlukeStore
www.
.com
Calibration Management Software
Note
1.877.766.5412
A Brief Tour
7
Advertisement
Table of Contents
