New! Fluke 233
Remote Display Multimeter
•
True-rms ac voltage and current
for accurate measurements on
non-linear signals
•
Measure up to 1000 V ac and dc
•
Measure up to 10 A (20 A for 30
seconds)
•
10,000 µF capacitance range
•
Frequency to 50 kHz
•
Built in thermometer conveniently
allows you to take temperature readings
without having to carry a separate
instrument
•
Resistance, continuity and diode test
Features
•
Low power wireless technology allows
the display to be carried up to 10
meters (33 ft) away from the point of
measurement for added flexibility.
No interference with measurements
The NEW Fluke 233 True-rms Remote
Display Digital Multimeter allows you to
be in two places at once.
• Removable display gives the user ultimate flexibility
in unusual measurement scenarios
• Place the display where you can see it and then put
the meter where it is convenient for you—no more
juggling of leads and the meter while stretching into
a tight spot
• Removes the dilemma of trying to take mea-
surements in hard-to-reach places, or making
measurements in machines or panels that are
physically separated from a limit or isolator switch
• Can be used in areas where the operator can't be
close to the active measurement point, like clean
rooms or hazardous areas
•
The removable magnetic display can be
conveniently mounted where it is easily
seen
•
Make measurements without holding
the meter to improve visual focus on
probes and augment safe electrical
measurements
•
Use as a conventional multimeter when
the display is connected
•
Radio transmitter automatically turns off
when the display is connected to the
meter
•
Auto power off maximizes battery life
•
Min/Max and Average recording to
capture variations automatically
•
Test continuity and diodes
•
Easy to read display with large digits
and bright backlight
•
Battery life approximately 400 hours
Technical Data