Table of Contents
Advertisement
Fluke 190 series II
Users Manual
Deleting Screens with Associated Setups
To delete a screen and associated setup, do the following:
1
Display the
SAVE
2
Open the
F4
3
Select the source, internal memory
F1
(INT) or a USB device.
4
Highlight
5
Accept your choice and jump to the
ENTER
filename field
6
Select the file to be deleted,
Or
Select all files for deletion
F2
7
Delete the selected files.
ENTER
76
key labels.
SAVE
menu.
FILE OPTIONS
,
DELETE
www.
Shop for Fluke products online at:
Recalling Screens with Associated Setups
To recall a screen+setup, do the following:
1
SAVE
2
F2
3
F1
4
5
ENTER
6
7
ENTER
Observe that the recalled waveform is displayed and that
appears on the screen. From this point you can use
HOLD
cursors and zoom for analysis or you can print the recalled
screen.
To recall a screen as a reference waveform to compare it
to an actually measured waveform, see Chapter 1
'Comparing Waveforms'.
MyFlukeStore
1.877.766.5412
.com
Display the
key labels.
SAVE
Open the
menu.
RECALL
Select the source, internal memory
(INT) or a USB device.
Highlight
.
DATA
Accept your choice and jump to the
filename field
Select the file to be recalled,
Recall the selected screen+setup.
Advertisement
Table of Contents
