Fluke 190-502/AM User Manual page 148

Fluke 190 Series II
Users Manual
Installing the USB Drivers
To install the USB drivers, do the following:
1 Connect the Fluke 190 Series II instrument to the PC. The USB
cable can be plugged in and out (hot-swap) when both the
computer and the instrument are on. It is not required to power
off.
When there is no driver loaded for the Fluke 190 Series II
instrument, Windows will show that there is New Hardware
detected, and the Wizard for installing new hardware will open.
Depending on your PC settings, Windows may ask for
permission to search the Windows Update Web site on the
internet for the latest revision. When you have an internet
connection it is advised to select "Yes" and click Next. To install
drivers from the CD-ROM or from a location on the hard drive
select "No, not this time".
A-2
www.
Shop for Fluke products online at:
MyFlukeStore
1.877.766.5412
.com