Fluke ScopeMeter 190-502 User Manual page 54

Fluke 190 Series II
Users Manual
Displaying Recorded Data
In Normal view, the samples that roll off the screen are
stored in deep memory. When the memory is full,
recording continues by shifting the data in memory and
deleting the first samples out of memory.
In View All mode, the complete memory contents are
displayed on the screen.
4 Press to toggle between
F3
(overview of all recorded
samples) and
You can analyze the recorded waveforms using the
Cursors and Zoom functions. See Chapter 3: "Using
Replay, Zoom and Cursors".
46
VIEW ALL
view.
NORMAL
www.
Shop for Fluke products online at:
Using Scope Record in Single Sweep Mode
Use the recorder Single Sweep function to automatically
stop recording when the deep memory is full.
Continue from step 3 of the previous section:
4
F1
5
F2
6
ENTER
7
F1
MyFlukeStore
1.877.766.5412
.com
Stop recording to unlock the
OPTIONS... softkey
Open the
RECORDER OPTIONS
menu.
Jump to the Mode field, select
Single Sweep and accept the
recorder options.
Start recording.