Fluke ScopeMeter 192B User Manual page 24

Fluke 192B - 196B/C - 199B/C
Users Manual
Using Persistence to Display Waveforms
You can use Persistence to observe dynamic signals.
1 Display the
2 Open the Waveform Options
menu.
3 Jump to Waveform: and open the
Persistence... menu.
4 Select Digital Persistence: Short,
Medium, Long or Infinite to
observe dynamic waveforms
(C-versions only).
Select Digital Persistence: Off ,
Envelope: On to see the upper
and lower boundaries of dynamic
waveforms (envelope mode).
16
key labels.
SCOPE
Select Dot-join: On or Off to
choose your personal preference
for the waveform representation.
Figure 10. Using Persistence to Observe Dynamic
Signals