Do you have a question about the HeatSeal H210 and is the answer not in the manual?
Questions and answers
Rosalini
February 18, 2025
Hi. We have a laminated paper stuck in the laminating machine and can't seem to get it out. Can you please advise how to fix this problem please.
1 comments:
Mr. Anderson
May 14, 2025
To remove a stuck laminated paper from a GBC H210 laminating machine, unplug the unit and do not attempt to service or repair it yourself. Contact an authorized GBC service representative for any required repairs.
Page 2
HeatSeal ™ H210/ H310 Important: Before operating your new laminator, lift up the exit tray located at the rear of the machine and lock it in place (fig. 1). Operation, hot lamination Connect power cord to appropriate power source. The inside of the laminator will glow green when the laminator has reached operating temperature.
Need help?
Do you have a question about the HeatSeal H210 and is the answer not in the manual?
Questions and answers
Hi. We have a laminated paper stuck in the laminating machine and can't seem to get it out. Can you please advise how to fix this problem please.
To remove a stuck laminated paper from a GBC H210 laminating machine, unplug the unit and do not attempt to service or repair it yourself. Contact an authorized GBC service representative for any required repairs.
This answer is automatically generated