Manually Enter Ssid - D-Link DSM-210 - Wireless Internet Photo Frame User Manual

Manually Enter SSID

If the SSID Broadcast is not enabled on your wireless router or
access point, it is necessary to enter the SSID or network name
manually. In the right column, select Manual SSID Entry.
Using the remote control, press the arrow keys to select each
letter or number and press OK. Once the SSID is complete, select
Enter on the onscreen keyboard. The SSID is case-sensitive and
must be entered exactly the same as on your wireless access
point or router.
If the wireless network you are connecting to is using wireless
security you will be prompted to enter the security passphrase.
Using the arrow keys on the remote control, select each letter
or number from the on screen keyboard and press OK. Once
the passphrase is complete, select Enter from the on screen
keyboard (refer to page 11).
Note: Allow about a minute for the DSM-210 to connect to your
wireless network.
Once you connect, you may skip to page 15 to configure/verify
your network settings.
D-Lnk DSM-210 User Manual 1