Network Settings; D-LNk Dsm-210 User Manual - D-Link DSM-210 - Wireless Internet Photo Frame User Manual

Network Settings

By default the DSM-210 is set to DHCP, allowing your network settings to be automatically configured from your router
or DHCP server. Most networks have DHCP enabled. If you are not sure, please verify your router's settings.
If you would like to set a fixed IP address for your frame, select Static and press OK. Enter the IP settings in the 5
fields and select OK to save. When DHCP is selected, the fields will be greyed out.
Verify your settings listed below Current Settings.
IP Address Mode: Displays Static or DHCP.
IP Address: The current IP Address of your
DSM-210.
Subnet Mask: The current subnet mask.
Default Gateway: The IP Address of your router or
gateway.
DNS1/DNS2: The addresses of your DNS server
(usually the IP address of your router)
SSID: The name of the wireless network you are
connected to (Wireless mode only).
Channel: Displays the wireless channel you are connected to (Wireless mode only).

D-Lnk DSM-210 User Manual

1