Care And Cleaning; Troubleshooting - Zanussi ZEV6646XBA User Manual

Information on acrylamides
Important! According to the newest scientific
knowledge, if you brown food (specially the one

Care and cleaning

Clean the appliance after each use.
Always use cookware with clean bottom.
Scratches or dark stains on the glass-ce-
ramic cause no effect on how the appli-
ance operates.
To remove the dirt:
1. – Remove immediately: melted plastic,
plastic foil, and food with sugar. If not,
the dirt can cause damage to the appli-
ance. Use a special scraper for the
glass . Put the scraper on the glass sur-

Troubleshooting

Problem
You cannot activate the appliance
or operate it.
An acoustic signal sounds and
the appliance deactivates.
An acoustic signal sounds when
the appliance is deactivated.
The appliance deactivates.
The residual heat indicator does
not come on.
The Automatic Heat Up function
does not operate.
www.zanussi.com
which contains starch), acrylamides can pose a
health risk. Thus, we recommend that you cook
at the lowest temperatures and do not brown
food too much.
2. Clean the appliance with a moist cloth and
3. At the end rub the appliance dry with a
Possible cause
The appliance is not connected to
an electrical supply or it is con-
nected incorrectly.
You touched 2 or more sensor
fields at the same time.
There is water or fat stains on the
control panel.
You put something on one or
more sensor fields.
You put something on the sensor
field .
The cooking zone is not hot be-
cause it operated only for a short
time.
The cooking zone is hot.
The highest heat setting is set.
face at an acute angle and move the
blade on the surface .
– Remove after the appliance is suffi-
ciently cool: limescale rings , water
rings, fat stains, shiny metallic discolora-
tions. Use a special cleaning agent for
glass ceramic or stainless steel.
some detergent.
clean cloth.
Check if the appliance is correctly
connected to the electrical supply
(refer to connection diagram).
Activate the appliance again and
set the heat setting in less than 10
seconds.
Touch only one sensor field.
Clean the control panel.
Remove the object from the sensor
fields.
Remove the object from the sensor
field.
If the cooking zone operated suffi-
ciently long to be hot, speak to the
service centre.
Let the cooking zone become suffi-
ciently cool.
The highest heat setting has the
same power as the Automatic Heat
Up function.
Remedy
9