Jenn-Air LANAI JED7430AAB Product Dimensions

P
G
M
N
L
J

NOTES:

1. Where possible, 6" (15.2 cm) is recommended for motor blower service. Minimum clearance of 1" (2.5 cm)
is required to sidewalls and 3/4" (1.9cm) to rear wall.
2. Provide 2" minimum (5.1 cm) cabinet clearance to motor for cooling purpose.
3. Provide 6 1/4" minimum (15.9 cm) required for removal of (supplied) grease container(s).
Installed dimension for (supplied) grease container(s) is 5 1/2" (14.0 cm)
4. Grills installed near a side wall must allow a minimum clearance of 6" (15.2 cm) between cooktop and side wall
for maximum performance.
5. Vents up to 60 equivalent feet.
6. This appliance has been designed in accordance with the requirements of various safety agencies and comply
with the maximum allowable wood cabinet temperatures of 194
that have a lower working temperature than 194
Electrical requirements: Provide for 120/240 or 120/208 VAC, 60 Hz. The unit must be properly circuitprotected
and wired according to local electrical codes.
Important: Because of continuing product improvements, Jenn-Air
planning purposes only. For complete details see installation instructions that accompany each product before selecting cabinetry, making cutouts or beginning installation.
LANAI DOWNDRAFT COOKTOP
TM
Q
A
C
B
D
4
H
K
˚
F, discoloration, delamination or melting may occur.
® reserves the right to change specifications without notice. Dimensional specifications are provided for
F
Style of product may vary from picture
˚
F. If these appliances are installed with cabinets
PRODUCT DIMENSIONS
INCHES CENTIMETERS
7 1
A 28 / / 73.3
8 16
B 20 15 / 1 / 53.2
16 16
3
C 9 /
8
D 7 9 /
16
F 13
G 1 7 / min 4.8 min
8
5
H 15 / min 39.7 min
8
J 14
7
K 11 /
8
L 2 2 min 5.1 min
M 3
N 3 6 1 / min 15.9 min
4
P 29 7 /
8
Q 21 1 /
2

MODEL SKUs

JED7430AAB
.2
.2
23.8
19.2
33.0
35.6
30.2
7.6
75.9
54.6