Changing The Bit Depth - Sony Sound Forge - Sound Forge Audio Studio 8 Quick Start Manual

Changing the bit depth

Bit depth refers to the number of bits used to represent a sound. You can increase or decrease a file's bit depth. Increasing the bit
depth does not change the quality of the audio, but it allows subsequent processing to be performed with increased precision.
However, representing a file with less bit depth results in audible distortion, referred to as quantization error.
1.
If you want to increase a file's bit depth, open a file with a small (8-bit) bit depth. If you want to decrease a file's bit depth, open
a file with a larger (16-bit) bit depth.
2.
From the Process menu, choose Bit-Depth Converter. The Bit-Depth Converter dialog is displayed.
3.
From the Bit depth drop-down list, choose a value.
4.
If desired, choose an option from the Dither drop-down list.
The Dither value determines the randomness of the dither (generated noise) used to mask quantization distortion resulting
from conversion to a lower bit depth.
5.
If desired, choose a Noise shaping type.
The Noise shaping value determines the aural positioning of quantization noise. Using this control, you can shift the noise into
audio registers that are less perceptible to human hearing. This lowers the perceived noise floor and creates the illusion of
cleaner audio.
Note:
When increasing a file's bit depth, the Dither and Noise shaping controls should be set to None and Off, respectively.
6.
Click OK.
18
| CHAPTER 4