Recording Remotely - Sony Sound Forge - Sound Forge Audio Studio 8 Quick Start Manual

Mode
Punch-In (record a specific
length)
Tip:
Recording starts at the cursor position. To change the recording start time (and cursor position) from the Record dialog, type a
number in the Start box to specify a position using the current status format, or click the Go To button (
dialog, where you can specify a position using any input format.
4.
Click the Record button
Tips:
• To monitor your audio input during recording and ensure it is as loud as possible without clipping, select the the Monitor check box
to enable the recording meters.
• Click the Arm button (
5.
Click the Stop button
6.
Click the Close button to close the Record dialog.

Recording remotely

Click the Remote button in the Record dialog to hide the main Sound Forge Audio Studio window and show only the Record
Remote dialog. The Record Remote dialog will be displayed in the foreground of any application so you can easily record while
using other components of your system such as a CD player, mixer, or sequencer.
Click the Back button on the Record Remote dialog to return to the Record dialog.
Tip:
Many of the commands from the Record dialog are available by right clicking anywhere in the Record Remote dialog.
28
| CHAPTER 7
Description
Punch-In mode is used to record over a specific selection in an existing data window.
Specifying Punch-In activates the Start, End, and Length boxes. Recording begins at
the position displayed in the Start box when you click the Record button (
continues until one of the following occurs:
• You click the Stop button (
• The cursor in the data window reaches the position displayed in the End box.
• The length of the recorded data equals the value in the Length box.
Punch-In mode makes it possible to record over a specific section of audio without the
risk of affecting the remainder of the audio file. You can preview the punch-in region
by clicking the Play button (
Tip:
You can specify a recording length using the current status format by typing
numbers in the End or Length boxes.
in the Record dialog (or press Alt+R) when you're ready to start recording.
( )
) if you want to begin recording as soon as possible after clicking the Record button (
to stop recording.
( )
).
).
) and
) to display the Go To
).