Use your Kenwood 6-speed
Only use the appliance for its
handmixer for mixing, beating and
intended domestic use. Kenwood
whipping cream, eggs, sauces and
will not accept any liability if the
many other mixtures. Heavier
appliance is subject to improper
doughs and other mixtures can be
use, or failure to comply with these
prepared with the kneaders
included with selected models of
before plugging in
Make sure your electricity supply is
before using your Kenwood
the same as the one shown on the
underside of your handmixer.
Read these instructions carefully
Important – UK only
and retain for future reference.
The wires in the cord are coloured
Remove all packaging and any
Blue = Neutral, Brown = Live.
Wash the beaters and kneaders if
The appliance must be protected
supplied: see 'care and cleaning'.
by a 3A approved (BS1362) fuse.
For non-rewireable plugs the fuse
cover MUST be refitted when
Never let the cord or plug get wet –
replacing the fuse. If the fuse cover
you could get an electric shock.
is lost then the plug must not be
Keep fingers, hair, clothing and
used until a replacement can be
utensils away from moving parts.
obtained. The correct fuse cover is
Never let the cord touch hot
identified by colour and a
surfaces or hang down where a
replacement may be obtained from
child could grab it.
your Kenwood Authorised Repairer
Never used a damaged handmixer.
Get it checked or repaired: see
If a non-rewireable plug is cut off it
'service and customer care'.
must be DESTROYED
Never use an unauthorised
IMMEDIATELY. An electric shock
hazard may arise if an unwanted
Always unplug the appliance when
non-rewireable plug is inadvertently
not in use, before fitting or removing
inserted into a 13A socket outlet.
parts or before cleaning.
This appliance conforms to EC
This appliance is not intended for
directive 2004/108/EC on
use by persons (including children)
Electromagnetic Compatibility and
with reduced physical, sensory or
EC regulation no. 1935/2004 of
mental capabilities, or lack of
27/10/2004 on materials intended
experience and knowledge, unless
for contact with food.
they have been given supervision or
instruction concerning use of the
appliance by a person responsible
speed switch and tool release
for their safety.
Children should be supervised to
ensure that they do not play with
to use your handmixer
service and customer
1 Insert the beaters or kneaders –
turn and push.
If the cord is damaged it must, for
important the kneader with the
safety reasons, be replaced by
metal collar will only fit into the
KENWOOD or an authorised
round socket. (To remove the tools,
press the tool release button).
2 Plug in.
If you need help with:
3 Push the speed switch forward.
using your appliance or
As the mixture thickens, increase
servicing, spare parts or repairs (in
or out of guarantee)
If the handmixer labours increase
call Kenwood customer care on
the speed and/or push the turbo
023 9239 2333. Have your
model number ready - it's on
The turbo button gives an extra
the underside of the power unit.
boost of power for those extra
spares and attachments
tough mixing jobs. Use for up to 30
call 0870 2413653.
seconds at a time.
important: When making bread
Contact the shop where you
dough we recommend that the
bought your appliance.
dough load does not exceed
care and cleaning
Always switch off, unplug and
remove the beaters or kneaders
never put the handmixer body in
water or let the cord or plug get
Wash by hand or in your
dishwasher, then dry.
Wipe with a damp cloth, then dry.