Using The Thermostat To Turn The Heating And Cooling System Off; Auto Changeover - Bryant Non-Programmable thermostat Owner's Manual

Operating the Thermostat

Using the thermostat to turn the heating and cooling system off

To use the thermostat to turn the heating and cooling
system off, press the mode button on the left repeatedly
until the display shows off in the upper left.

Auto changeover

The thermostat uses one of five modes: heat, cool, Em heat (heat
pump version only), auto, and off. When the mode selection is auto,
the thermostat is in auto changeover mode. This allows the system
to switch from heating to cooling – or from cooling to heating – to
maintain the temperatures you've set. It does this automatically.
14