Basic Commands (Direct Access); Lock; Unlock - Viper 5501 Owner's Manual

Remote start and keyless entry system
Hide thumbs Also See for 5501:
Table of Contents

Advertisement

Basic commands (Direct Access)

Lock

Press and release
level 1
The doors lock and the horn honks (if connected) and
parking lights fl ash once. The
and the System Status Icons update. If Valet mode* is On the doors
lock and the
system normally.
If the door was open when locking, you are notifi ed of an active zone
immediately after locking the system. The horn in the vehicle "honks"
again. The 2-way remote control sounds a short "error" tone, and the
LCD displays the door icon.
Note: the optional door input and horn honk must be connected for
the system to give notifi cation.
To Lock and Panic
Press and hold
The system Locks (or Locks in Valet) and, after 2 seconds, sounds
the horn and fl ashes the parking lights. The
and horn honks to confi rm. Press the
output.

Unlock

Press and release
The doors unlock (if connected), and the horn honks (if connected)
and parking lights fl ash twice. The
confi rm and the system status icons update. If Valet mode* is On the
doors unlock and the
© 2009 Directed Electronics. All rights reserved.
level 2
AUX
text and tone play. Exit Valet mode to Lock the
valet
AUX
AUX
valet
level 3
text and beeps play to confi rm
locked
AUX
AUX
AUX
unlocked
text and tone play.
level 4
level 4
panic
or
button to stop the
AUX
AUX
AUX
text and beeps play to
ALL
1
6:30
text displays
AUX
13

Advertisement

Table of Contents
loading

Table of Contents