Table of Contents
Advertisement
Actiontec USB/Ethernet DSL Gateway User Manual
"Broadband Connection via PPPoA" screen:
If a User Name and Password was entered in the Installation Buddy or during
Basic Setup, it should be displayed in the "Broadband Connection via
" screen. If not, enter the information now. If the information is unavailable,
PPPoA
contact the
.
ISP
PPP Auto Connect
If
auto connect is activated (by clicking in the appropriate check box), the
PPP
Gateway will attempt to automatically redial the
or disconnected during an online session. Actiontec recommends that you turn
Auto Connect
PPP
Encapsulation (PPPoA only)
Select one of the encapsulation options, based on information received from the
.
ISP
Obtain an IP Through DHCP
Select this option if the
(used for configurations without a Static
Gateway will query the Internet Service Provider (
and routing information, which will terminate at the Gateway, as opposed to the
address and routing information being bridged to terminate at the computer. This
allows the use of the router capabilities for the Local Area Network (
Some
s need to authenticate their end users with a Host Name and/or Domain
ISP
Name. If this is the case, check with the
enter them in the appropriate text boxes in the "Broadband Connection via
screen. If the
does not require these settings, leave the text boxes blank.
ISP
.
ON
service is configured to use
IP
connection if it is dropped
PPP
1483 Bridged or Routed
RFC
assigned by an
IP
ISP
) to receive the
ISP
for a host name and domain name and
ISP
38
PPPoE/
). In this mode, the
address
IP
).
LAN
DHCP
IP
"
Advertisement
Table of Contents
