Edimax AR-7211A V2 Quick Installation Manual page 4

LEDs Color
Green
Red
ADSL Green
Internet Green
Red
LAN Green
Note:
1) If the ADSL LED is off, please check your Internet connection. Refer to A .
Hardware Installation for more information about how to connect the
router correctly. If all connections are correct, please contact your ISP to
check if there is a problem with your Internet service.
2) If the Internet LED is red, please check your ADSL LED first. If your ADSL
LED is off, refer to Note 1. If the green ADSL LED is ON, please check your
Internet configuration. You may need to check with your ISP that your
Internet is configured correctly.
Rear Panel
Status
ON Powered on
OFF Powered off
ON ADSL broadband initial self-test failed or upgrading
firmware
ON ADSL line is synchronized and ready to use
SLOW ADSL synchronization failed ( Please refer to Note
BLINK 1)
FAST BLINK ADSL negotiation is in progress.
ON Internet connected in router mode
BLINK Internet activity (transferring/receiving data) in
router mode
OFF Device in bridged mode
ON Internet not connected in router mode
(Please refer to Note 2)
ON LAN port connected
BLINK LAN activity (transferring/receiving data)
OFF LAN port not connected
Description
Figure 2
3