4.7
Register a camera unit
IMPORTANT
When you purchase your baby monitor system, all
cameras are already registered to the parent unit, so you
do not need to register them.
Camera registration is only necessary if one has become
faulty or if you buy a new one.
You can register up to 4 cameras to the parent unit.
To register a camera unit:
1
1. Press
to access the main menu.
+
-
2. Press
or
to select REGISTER.
1
3. Press
to confirm. The parent unit will display
Registration mode, and then display Registering...
which indicates it has entered the registration mode.
>
4. Press and hold
on the camera unit until it emits a
beep tone.
5. There will be a beep and the display will show
Registered when the registration is successfully
completed, and the camera will be assigned a baby
unit number, which can be checked from the parent
unit.
PARENT UNIT SETTINGS
4.8
Reset
You can restore all the adjustable settings of the
registered camera units and parent unit to the original
factory settings.
1
1. Press
to access the main menu.
+
-
2. Press
or
to select RESET.
1
3. Press
to confirm. The display will show CONFIRM?.
1
4. Press
to confirm again. The parent unit and the
registered camera units will be reset.
17