Table of Contents
Advertisement
Note
The current temperature at the camera unit is shown on
the parent unit status bar whenever it is displayed.
3.6
Lullaby
There are 3 lullabies available to play for your baby, either
repeating one lullaby or repeating through all three
lullabies.
2
1. Press
on the camera unit to select the lullaby and
start playing when the camera is linked with the
parent unit.
2. During playback, press
different lullabies.
OR
8
Press
on the camera unit to start playing the
selected lullaby.
3. During playback, press
NOTE
Once the camera unit loses the link with the parent unit,
the lullaby playing will be stopped and will not be resumed
automatically even if the link is set up again.
14
2
to step through the
9
to stop playing.
3.7
Switch monitoring camera unit
The system allows registering up to four camera units.
You can switch the monitoring camera unit by one-touch
key or by menu settings.
By one-touch key:
3
Press
on the parent unit when it is in video monitoring
mode. The parent unit will switch to the next registered
camera unit to monitor your baby. You can switch to other
registered camera units by further pressing
necessary, with each registered camera unit being
selected in turn.
By menu settings:
The system also allows the parent unit to be set to
automatically switch between all the camera units, with
each registered camera unit being selected in turn at
about 30 second intervals. Refer to section 4.6 for the
instructions of how to set the parent unit to scan through
all camera units automatically.
3
if
USING YOUR BABY MONITOR
Advertisement
Table of Contents
