Table of Contents
Advertisement
2.2
Parent unit battery installation
A rechargeable battery pack is supplied and should be
fitted, so that the parent unit can be moved without losing
the link and picture from the camera unit(s). Charge the
parent unit before you use it for the first time or when the
parent unit indicates that the battery is low.
Battery SOCKET
Battery PLUG
GETTING STARTED
1. Take off the belt clip/stand.
2. Slide off the battery compartment cover.
3. Insert the plug of the battery pack into the socket
inside the battery compartment, and fit the battery
pack into the compartment.
4. Replace the battery compartment cover, and reinstall
the belt clip/stand (refer to section 2.3).
5. Insert the DC plug of the power adapter with the
bigger DC plug into the DC socket in the side of the
parent unit.
6. Connect the other end of the power adapter to a
suitable mains power socket.
7. The Charging Indicator comes on.
NOTE
Only use the provided power adapter and battery pack.
The parent unit can work with the power adapter
connected but without a battery pack installed.
11
Advertisement
Table of Contents
