Advertisement
12. Scratch/TAP(Holding PAGE First)
a.
Scratch: To switch on/off this function.
b.
Tap: Press with the beat to get a manual BPM value.
13. PFL
Press it to monitor a specific channel.
14. SYNC
Press it to immediately synchronize with the BPM of the other channel.
15. KEY
Press it to switch KEY mode on or off. If it is ON, the unit maintains at a constant
tempo and doesn't change while the pitch slider is moving.
16. Line Fader
Adjust the channel output sound level.
17. Crossfader
Switch between or mix together with music of two channels.
18. Pitch Fader
Use it to adjust the pitch up or down to match the beat with the other channel.
19. Jog Wheel
Use it to dial for slight adjusting pitch value or to scratch.
20. Headphone Output
Use it to connect to a 3.5mm plug of a headphone.
21. USB Connector
Use it to connect with a laptop or a desktop via USB cable.
10
Advertisement
