Set Up Speed Dialing; Call Log - Zte Sprint Flash User Manual

Note: When a Bluetooth headset is connected to your phone, you can route the audio through
the Bluetooth headset (
Touch one of these icons and select Speaker, Handset earpiece, or Bluetooth to
change how the audio is routed.
●
Touch to mute the microphone during an active call. Touch again to unmute the
microphone.
●
Touch to make another call separately from the first call, which is put on hold.
●
Touch to toggle the appearance of the onscreen dialpad. You can use it during a call
to enter additional numbers, for example, an extension or PIN to your bank account.
●
Touch to join two separate calls to a single 3-way call. This option only appears
when you are connected to two calls at the same time.
●
Touch to end the current call.
●
Touch during a call to display additional in-call features. You can touch Record to start
recording the phone conversation or touch Stop Recording to end it.

Set Up Speed Dialing

Your phone can store up to nine phone numbers in speed dial locations.
To assign a speed dial number to a contact:
1. Touch
2. Touch a speed dial key.
3. Enter the phone number or touch
4. Touch OK.
Note: If you assign a number to an already in-use speed dial location, the new phone number
will automatically replace the previous speed dial assignment.

Call Log

The Call log tab of the Phone application lists all recent incoming, outgoing, and missed calls.
View Recent Calls
1. Touch
2. Touch to display the recent calls list.
Phone Calls
), the phone earpiece (
> > Settings > Call > Speed dial.
> to display the phone screen.
), or the phone speaker (
and select one from the contacts.
33
).