Reconnect A Headset Or Car Kit; Disconnect Or Unpair From A Bluetooth Device; Send And Receive Information Using Bluetooth - Zte Sprint Flash User Manual

Reconnect a Headset or Car Kit

When you have paired a headset with your phone, you should be able to reconnect it
automatically by turning on Bluetooth on your phone and then turning on the headset. However,
sometimes you will need to reconnect manually, for example if you have been using your
headset with another Bluetooth device.
1. Touch
2. If Bluetooth is not switched on, slide the switch to the ON position.
3. Make sure that the headset is discoverable.
4. Touch the headset's name in the Bluetooth devices section.
5. If prompted to enter a passcode, try 0000 or 1234, or consult the headset or car kit
documentation to find the passcode.
6. If you still cannot reconnect to the headset or car kit, follow the instructions in
or Unpair From a Bluetooth
Bluetooth Headset or Car

Disconnect or Unpair From a Bluetooth Device

You can manually disconnect or unpair from a Bluetooth device through the Bluetooth settings
menu.
Disconnect a Bluetooth Device
1. Touch
2. In the Bluetooth devices section, touch the device to disconnect.
3. Touch OK.
Unpair From a Bluetooth Device
You can make your phone forget its pairing connection with another Bluetooth device. To
connect to the other device again, you may need to enter or confirm a passcode again.
1. Touch
2. In the PAIRED DEVICES section, touch
3. Touch Unpair.

Send and Receive Information Using Bluetooth

You can use Bluetooth to transfer information between your phone and another Bluetooth-
enabled device such as a phone or notebook computer. The first time you transfer information
Tools and Calendar
> > Settings > Bluetooth.
Device, and then follow the instructions in
Kit.
> > Settings > Bluetooth.
> > Settings > Bluetooth.
behind the device to unpair.
152
Disconnect
Connect a