Wi-Fi Direct - Zte Sprint Flash User Manual


Broadcast SSID: Enable or disable the broadcast of your network SSID. If the
broadcast is disabled, other users need to get your network SSID to find the Wi-Fi
hotspot.

Security: Select the type of security you want: Open (not recommended), WPA PSK
or WPA2 PSK (other users can access your mobile hotspot only if they enter the
correct password). When you select WPA PSK or WPA2 PSK, touch Password to
edit the security password.
3. Touch Save to save your settings.
4. To limit the number of devices to share your device's data connection, touch Manage
Users > Max connection and select the number of the devices to limit.
5. Select the Portable Wi-Fi hotspot check box in the Tethering & portable hotspot
settings screen to turn on the hotspot.
To connect a device to the mobile Wi-Fi hotspot:
1. Enable Wi-Fi on your device (for example, a laptop computer).
2. Select the Network SSID for your mobile hotspot and enter the password if prompted.
3. When "Connected" appears on your device, launch your Web browser to confirm you
have an Internet connection.

Wi-Fi Direct

Wi-Fi Direct allows Wi-Fi devices to connect to each other without the need for wireless access
points (hotspots).
Note: Activating this feature will disconnect your current Wi-Fi network connection.
1. Touch
2. Tick the Wi-Fi direct check box to turn on Wi-Fi direct.
3. Your phone will search for other devices enabled with Wi-Fi direct connections. Touch
Wi-Fi direct settings to see all available devices.
4. Touch a device name to begin the connection process.
Note: The target device must also have Wi-Fi Direct service activated and running before it
can be detected by your phone.
5. Touch Connect.
The other device will receive a Wi-Fi Direct connection prompt and need to accept the
request for connection.
Web and Data
> > Settings > More....
124