Gateway Flat Panel Television User Manual page 42

Chapter 3: Adjusting Your Plasma TV Settings
OSD Menu
PIP/POP
PICTURE SOUND
PIP
SOURCE
POSITION
H-LOCATION
V-LOCATION
SWAP
POP
SOURCE
SCREEN RATE
SWAP
SELECT ITEM
38
PIP/POP TV OTHER
OFF
TV
FIXED
RIGHT
TOP
DISABLE
OFF
TV
FULL
DISABLE
ADJUST VALUE
www.gateway.com
Description
PIP. Turns PIP mode on or off. When PIP is
turned on, you can display two pictures at one
time. One picture is displayed on the full screen
and the other picture is displayed in a small
window. The picture on the full screen is the main
picture. The picture in the window is the
sub-picture.
You can use PIP mode if your video input source
is set to TV, AV, S-Video, Component 1, or
Component 2 and the video input source is 480i
or lower (such as a non-progressive DVD player).
PIP mode does not work with component video
input sources higher than 480i (such as an
HDTV set-top box or progressive DVD player),
RGB, or DVI video sources.
SOURCE. Changes the video input source of the
sub-picture when PIP is turned on.
POSITION. Moves the sub-picture within the
screen.
FIXED lets you use the H-LOCATOR and
V-LOCATOR options to place the sub-picture in
one of the four corners of the screen.
VARIABLE lets you use the H-LOCATOR and
V-LOCATOR options to move the sub-picture
anywhere within the screen.
H-LOCATION. Moves the sub-picture left or
right.
V-LOCATION. Moves the sub-picture up or
down.
SWAP. Swaps the picture and the sub-picture.