Connecting An External Receiver Or Amplifier - Gateway Flat Panel Television User Manual

Connecting an external receiver or
amplifier
You can connect an external receiver or amplifier to your plasma TV. Your
plasma TV is equipped with a external speaker switch that can automatically
send a remote turn-on/off signal to an external receiver or amplifier.
To connect your external receiver or amplifier:
1
Connect the red (R) and white (L) audio jacks on the back of your external
amplifier or receiver to the AUDIO OUT jacks on the back of your
plasma TV.
2
If your external amplifier or receiver accepts remote turn-on/off signals,
connect the external speaker switch. Not all external amplifiers or receivers
can accept remote turn-on/off signals.

Connecting an external receiver or amplifier

www.gateway.com 27