Quick Start - Hoshizaki Reach-In Instruction Manual

Heated Holding Cabinet

QUICK START

HEATING CONTROL:
When power is first activated, all LED's and display segments light.
After the control initializes, the green thermometer bulb blinks.
When the heating element is turned on the green thermometer bulb
symbol stops blinking. It completely turns off when the temperature
set point is reached and the heating element is turned off.
This cycle continues to maintain the cabinet temperature while
actual cabinet temperature is displayed.
HOW TO SEE THE SET POINT:
1. Push and immediately release the SET Key.
The display will show the Set Point Value.
2. Push and immediately release the SET Key or wait 5 seconds
to display the probe value (actual cabinet temperature) again.
TO VIEW
SET POINT
PRESS
SET
SET
HOW TO CHANGE THE SET POINT:
1. Push the SET Key for more than 2 seconds to change
the Set Point Value.
2. The value of the Set Point will be displayed and the
°C or °F LED indicator starts blinking.
3. To change the Set Point Value, push the UP or DOWN arrows
within 10 seconds.To memorize the new Set Point Value,
push the SET Key again or wait 10 seconds.
TO CHANGE SET POINT
1. PRESS & HOLD SET
2. PRESS ▲▼
5
PROFESSIONAL SERIES