Electrical Requirements - Hoshizaki Reach-In Instruction Manual

Professional series heated holding cabinet
Hide thumbs Also See for Reach-In:
Table of Contents

Advertisement

Hoshizaki Professional Series
WARNINGS

ELECTRICAL REQUIREMENTS

AND GROUNDING
Hoshizaki standard models operate on 110/120 volt, 60 Hz, 1 ph,
A.C. (unless ordered otherwise), and are equipped with a three
prong grounding cord plug for your protection against possible
shock hazards. Be sure to plug only into a properly grounded
three prong wall receptacle. If you have any questions with
regard to adequate wiring or grounding in your building, a
qualified electrician should be contacted before using your
cabinet. The amperage of your cabinet is stamped on the
name plate attached to the unit.
DO NOT, UNDER ANY CIRCUMSTANCES, CUT OR REMOVE
THE GROUNDING PRONG FROM THE CORD PLUG.
WARNING: ONLY A QUALIFIED ELECTRICIAN SHOULD
ATTEMPT TO REPAIR OR REPLACE ELECTRICAL
COMPONENTS OR WIRING.
BE SURE THAT MODEL IS UNPLUGGED FROM ELECTRICAL
SOURCE BEFORE REMOVING CONTROL PANEL.
4
HOSHIZAKI HEATED HOLDING CABINET

Advertisement

Table of Contents
loading

Table of Contents