Front Panel - Mackie Control C4 Pro Quick Start Manual

Dsp plug-in and virtual instrument controller
Table of Contents

Advertisement

Using the Mackie Control C4 Pro
Please refer to your particular DAW's docu-
mentation for specific instructions on establishing
communication with Mackie Control C4 Pro, and
for operating instructions when using Mackie Con-
trol C4 Pro with the DAW. Visit our website for the
latest information on all the currently supported
DAW applications for the Mackie Control C4 Pro.
Note: Our website also contains documentation
on how to set up the C4 with the various supported
DAW applications.
www.mackie.com/products/c4/index.html

Front Panel

1. Scribble Strips
These backlit LCDs above the V-Pots display
control names, parameters, values, and other in-
formation depending on the plug-in or
instrument assigned to the C4 Pro.
. V-Pots
The V-Pots serve a dual function on
the Mackie Control C4 Pro, acting as a
push-button and a rotary control. When
a V-Pot is pressed, it may be used to
change modes of operation or to change
what appears in the display above the
channel strips.
When a V-Pot is rotated, depending
on its assigned function, it can be used
to adjust a pan, send level, or other pa-
rameter.
. Functions, Assignment, Modifiers
The function of these buttons vary,
depending on the DAW application you
are using. Place the overlay for your
particular DAW application over this
section to provide the correct labeling
for these buttons, and refer to the docu-
mentation for the DAW application that
describes how it operates with Mackie
Control C4 Pro.

Mackie Control C4 Pro
4. Parameter
These buttons may also vary depnding on the
DAW application you are using, but generally
they are used to shift the controls left and right in
banks of eight, or to shift single controls left and
right.
. Navigation
These four arrow buttons are used to navigate
around the graphic editor in your DAW application.
MACKIE CONTROL C4 PRO
1
2
3
4
FUNCTION
ASSIGNMENT
MODIFIERS
1/3
2/2
MARKER
LOCK
TRACK
SHIFT
OPTION
3/1
FUNCTION
SPLIT
SPOT ERASE
CHAN STRIP
CONTROL
5
6
7
8
PARAMETER
SLOT UP
BANK
SINGLE
TRACK L
/ALT
SLOT DOWN
TRACK R

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents