Installing Zip Drive Software - Gateway Computer Drive User Manual

Chapter 3: Installing a New Drive

Installing Zip drive software

If you installed a Zip drive, you need to install additional software. Use the
Iomegaware™ CD to install your Zip drive software.
Important
To install the Zip drive software:
1
Start your computer.
2
Insert the IomegaWare CD into your computer's CD or DVD drive.
3
If the Iomega setup program starts automatically, go to Step 7.
- OR -
If the Iomega setup program does not start automatically, go to the
next step.
4
In Windows XP, click
window opens.
- OR -
In Windows Me, Windows 2000, Windows 98, or Windows NT 4.0,
double-click the
5
Click/Double-click the CD or DVD drive letter (usually D: or E:). The CD
or DVD drive window opens.
6
Double-click
7
Install the software by following the on-screen instructions.
8
When the software installation is complete, restart your computer.
30
If you are installing in Windows NT 4.0, Service Pack 4 (or
greater) is required for Zip compatibility. You must have
administrator privileges for your local computer to install
the Zip drive software and to run the ToolsNT utilities.
If you reinstall Windows NT 4.0, you may need to reinstall
the Zip drive software.
, then click
Start
icon. The My Computer window opens.
My Computer
.
Setup.exe
www.gateway.com
. The My Computer
My Computer