Table of Contents
Advertisement
To charge your device
1
Plug the charger into a power outlet.
2
Plug one end of the USB cable into the charger (or into the USB port of a
computer).
3
Plug the other end of the cable into the micro USB port on your device, with
the USB symbol facing up. The notification light illuminates when charging
begins.
4
When the device is fully charged, disconnect the cable from your device by
pulling it straight outwards. Make sure not to bend the connector.
If the battery is completely discharged, it may take a few minutes before the notification light
illuminates and the charging icon
Battery notification light status
Green
The battery charge level is greater than 90%
Flashing red
The battery level is low
Orange
The battery is charging and the battery charge level is less than 90%
This is an Internet version of this publication. © Print only for private use.
appears.
12
Advertisement
Table of Contents
